License Plate Holder - APRILIA SR MAX 125 ie Service Station Manual

Chassis
- Remove the three screws indicated in the figure.

License plate holder

- Remove the rear lower central cover.
- Remove the four fixing screws (two per side) and
disconnect the electric connectors.
- To access the license plate light bulb, remove the
two fixing screws of the support rear cover and ex-
tract the complete bulb holder.
Air filter
To remove the complete air filter from the engine,
proceed as follows:
- Undo the two screws «A» and the screw «B»
collecting the washers.
CHAS - 264
SR MAX 125 ie