Hub Oil Check - APRILIA SR MAX 125 ie Service Station Manual

Maintenance
THE SPARK PLUG MUST BE REMOVED WHEN THE EN-
GINE IS COLD. REPLACE THE SPARK PLUG AS INDICA-
TED IN THE SCHEDULED MAINTENANCE TABLE. USING
NON-COMPLYING ELECTRONIC IGNITIONS OR SPARK
PLUGS OTHER THAN THOSE PRESCRIBED MAY SERI-
OUSLY DAMAGE THE ENGINE.
Characteristic
Spark plug
NGK CR8EB
Electric characteristic
Electrode gap
0.7 to 0.8 mm
Locking torques (N*m)
Spark plug
12 ÷ 14
Hub oil
Check
-Park the vehicle on its centre stand on flat ground;
-Remove the oil dipstick «A», dry it with a clean
cloth. Reinsert it tightening it fully;
Remove the dipstick and check that the oil level is
slightly over the second notch starting from the
lower end; if the level is under the MAX. mark, it
needs to be filled with the right amount of hub oil.
-Screw up the oil dipstick again and make sure it
is locked properly into place.
MAIN - 38
SR MAX 125 ie