Front Brake Disc Removal; Front Brake Disc Refitting; Front Brake Disc Inspection - APRILIA SR MAX 125 ie Service Station Manual

Braking system
Removal
- Remove the front wheel.
- Undo the five clamping screws shown in the pho-
tograph
Refitting
For fitting, position the disc correctly using the arrow stamped on it as reference.
- Do up the screws to the prescribed torque and apply the recommended product
NOTE
THE ARROW STAMPED ON THE DISC INDICATING THE RUNNING DIRECTION MUST BE FITTED
TOWARDS THE OUTSIDE OF THE VEHICLE.
Recommended products
Loctite 243 Medium strength threadlock
Medium Loctite 243 threadlock
Locking torques (N*m)
Brake disc fixing screw 5 to 6.5
Disc Inspection
Checking the disc is important; it must be perfectly clean, with no sign of rust, oil or grease or any other
dirt, and must show no signs of deep scoring.
Characteristic
New rear disc thickness
4.0 mm
Disc thickness at wear limit (front)
3.5 mm
BRAK SYS - 238
SR MAX 125 ie