SR MAX 125 ie
Engine
Refitting the valves
- Lubricate the valve guides with engine oil.
- Place the valve spring supports on the head.
- Using the special punch, fit the four valve seal rings.
- Fit the valves, the springs and the caps. Using the appropriate tool with adapter, compress the springs
and insert the cotters in their seats.
NOTE
DO NOT CHANGE THE VALVE FITTING POSITION. FIT THE VALVE SPRINGS WITH THE REF-
ERENCE COLOUR ON COTTER SIDE (TURNS WITH GREATER PITCH).
Specific tooling
020306Y Punch for assembling valve seal rings
020382Y011 adapter for valve removal tool
020382Y Tool to extract valve cotters
Inspecting the cam shaft
NOTE
ENG - 139