APRILIA SR MAX 125 ie Service Station Manual page 224

Suspensions
- Remove the buffer cover undoing the screws in-
dicated .
- Remove the clamp by undoing the screw indica-
ted..
- Unscrew the two«A» screw on each side of the
vehicle.
- Unscrew the «B» nut and extract the pin from the
opposite side.
- Check the entire swinging arm assembly.
- Check all the centring bushing components and silent block rubber buffers.
- Replace the work components that cause excessive clearance on the rear suspension.
SUSP - 224
SR MAX 125 ie