Chassis
This section è is dedicated to the operations that can be carried out on the vehicle's bodywork.
Seat
Lift the saddle to remove it:
- Push and turn the ignition lock key anticlockwise
until it clicks.
- Lift the saddle.
- Remove the control button of the under seat light.
- Remove the two fixing screws to the chassis.
Rear handlebar cover
- Release the three retaining tabs of the rear han-
dlebar cover shown in the figure using a screw-
driver and paying attention not to damage the
paintwork.
- Remove the five fixing screws from the rear han-
dlebar cover.
- Remove the rear cover.
NOTE
WHEN INSTALLING, THE CENTRE SCREW IS A METAL
SCREW, THE OTHER 4 ARE PLASTIC.
CHAS - 250
SR MAX 125 ie