Swing-Arm Overhaul - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
Overhaul
- Make sure the silent bloc is not broken. If it is,
replace the coupling.
- Remove the Seeger ring shown in the picture
- Remove the full silent bloc bracket
- Undo the silent bloc ring shown in the picture
- Hold the full silent bloc bracket in the clamp
- Using the appropriate tool, remove the silent bloc
from the bracket from the side corresponding to
the inside of the vehicle. This is to guarantee the
tool is centred properly on the support
Suspensions
SUSP - 225