Knee-Guard - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
- Undo the central screw.
- Undo the two screws indicated.
- Undo the rider footrest fixing screw «C» and the
spoiler fixing screw «D».
- Remove the front shield releasing the different
cable harness from the clamps.
To refit follow the reverse order paying attention to fasten the cable harness with the relative clamps.

Knee-guard

The shield back plate is made by two sections. The instrument panel, with instrument unit and lower
shield back plate. The procedure for both is described below:
INSTRUMENT PANEL:
- Remove the windshield.
- Remove the rear handlebar cover.
- Remove the front handlebar cover.
- Remove the handlebar.
Chassis
CHAS - 257