Chassis
Flyscreen
- Remove the three hex. socket head screws, then
remove the windshield together with the rubber
rings.
To remove the windshield supports, proceed as
follows:
- Remove the caps and the gaskets on the two
windshield supports.
- Remove the FRONT UPPER FRAME.
- Working from both vehicle sides, undo and re-
move the two screws «A».
- Remove the supports.
Pilot lights kit
- Remove the front handlebar cover.
- Remove the three screws shown in the figure,
then slide off the complete unit from the front han-
dlebar cover.
CHAS - 272
SR MAX 125 ie