SR MAX 125 ie
- Remove the Seeger ring indicated.
Specific tooling
020376Y Adapter handle
020375Y 28 x 30 mm adaptor
020363Y 20-mm guide
- Remove the driven pulley shaft bearing using the
modular punch.
Specific tooling
020376Y Adapter handle
020375Y 28 x 30 mm adaptor
020363Y 20-mm guide
Inspecting the hub shaft
- Check that the 3 shafts exhibit no wear or defor-
mation on the grooved surfaces, at the bearings
and at the oil seals.
- In case of faults, replace the damaged parts.
Engine
ENG - 113