Headlight Assy.; Frame Central Cover - APRILIA SR MAX 125 ie Service Station Manual

Chassis

Headlight assy.

The front headlight assembly has two units, the
procedure for both is the following:
- Remove the front lower frame (see FRONT
SHIELD).
- To remove the right headlight assembly undo the
two screws «A».
- To remove the left headlight assembly undo the
two screws «B».
- To remove the right assembly, remove the screw
located in the coolant loading compartment.
- To remove the left-hand light assembly, remove
the screw located in the left-hand storage com-
partment.
Remove the light, disconnecting the electric con-
nector from the light and the complete lamp holder
of the position light.
NOTE
THE TWO REAR ADJUSTMENT SCREWS SHOWN IN THE
FIGURE ARE ADJUSTED DURING ASSEMBLY OF THE
LIGHT AND MUST NOT BE ALTERED.

Frame central cover

The chassis central cover has a central tunnel and two side fairings, the procedure is the following:
CENTRAL TUNNEL:
CHAS - 252
SR MAX 125 ie