Steering Column Removal - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
Steering column
Removal
- Remove the front wheel.
- Remove the front mudguard
- Remove the front brake calliper
- Remove the shield back plate upper side.
- Remove the pin mounting the handlebar to the
steering tube.
- Remove the handlebar and rest it on the shield
back plate.
- Remove by releasing the cable passages and
sliding the protection collar upwards.
- Using the appropriate tool, loosen and remove
the upper ring nut, the space washer, the counter
ring nut and the spacer.
- Remove the cover plate and upper seat of the
steering fifth wheel.
- Extract the fork.
NOTE
TAKE CARE TO SUPPORT THE FORK SO AS TO PREVENT
IT FROM COMING OFF ABRUPTLY
Specific tooling
020055Y Wrench for steering tube ring nut
Suspensions
SUSP - 213