Inspecting The Driven Fixed Half-Pulley - APRILIA SR MAX 125 ie Service Station Manual

Engine
020363Y 20-mm guide

Inspecting the driven fixed half-pulley

Version 250
- Measure the outside diameter of the pulley bushing.
- Check the faying surface with the belt to make sure there are no flaws.
- Check the riveted joints are functional.
- Check the evenness of the belt contact surface.
Characteristic
Half-pulley minimum diameter
Minimum admissible diameter: Ø 40.96 mm
Half-pulley standard diameter
Standard diameter: Ø 40.985 mm
Wear limit
0.3 mm
ENG - 100
SR MAX 125 ie