Chassis
FRONT TURN INDICATORS:
- Undo and remove the three screws indicated.
- Disconnect the front turn indicator connector.
- Undo and remove the three screws to remove the
bulb holder from the support.
FRONT SHIELD:
- Remove the front lower frame.
- Remove the front upper frame.
- Remove the front headlight assemblies.
- Remove the instrument panel (see SHIELD BACK PLATE).
- Remove the lower shield back plate (see SHIELD BACK PLATE).
- Remove the hand guards unscrewing, from both
sides, the two screws «A» collecting the washers
and the screw «B».
CHAS - 256
SR MAX 125 ie