APRILIA SR MAX 125 ie Service Station Manual page 10

Characteristics
Specification
Fuel system
Cooling
Transmission
Specification
Transmission
Final reduction gear
Capacities
Specification
Engine oil
Transmission oil
Cooling system fluid
Fuel tank (reserve)
Electrical system
Specification
Starter
Ignition
Ignition advance
Spark plug
Battery
Alternator
Frame and suspensions
Specification
Chassis
Front suspension
Front suspension travel
Rear suspension
Rear suspension travel
CHAR - 10
Fuel
TRANSMISSION
CAPACITY
ELECTRICAL SYSTEM
CHASSIS AND SUSPENSIONS
Desc./Quantity
32 MIU2.E0 Electronic injection with Ø 32-mm throttle body and
electric fuel pump.
Forced-circulation coolant with electric pump commanded by
the control unit.
Unleaded petrol (95 RON)
Desc./Quantity
Automatic expandable pulley variator with torque server, V-
belt, self-ventilating dry automatic centrifugal clutch and trans-
mission housing with forced-circulation air cooling.
Gear reduction unit in oil bath.
Desc./Quantity
1.30 l
250 cm³
1.75 l
approx.15.00 l (approx. 2.80 l)
Desc./Quantity
Electric
Electronic inductive discharge ignition, high efficiency, with
separate HV coil.
α/N three-dimensional map managed by control unit
NGK CR8EKB
Sealed, 12 V / 12 Ah
alternating current
Desc./Quantity
Tubular and steel sheets.
Hydraulic telescopic fork with Ø 35-mm stem
104 mm
Two double-acting shock absorbers with preloading adjust-
ment in 4 positions.
95.5 mm
SR MAX 125 ie