Refitting The Rear Wheel; Swing-Arm Removal - APRILIA SR MAX 125 ie Service Station Manual

SR MAX 125 ie
- Undo the five wheel fixing screws and collect the
wheel.

Refitting the rear wheel

To fit, follow the removal procedure but in reverse order.
Locking torques (N*m)
Silencer arm clamping screws 27 - 30 Rear wheel axle nut 104 to 126 Shock absorber-crankcase
attachment bracket 20 to 25 Lower shock absorber clamping screw 33 - 41 Nm Rear brake cal-
liper fixing screws 25 - 30 Nm
Swing-arm
Removal
- Place the vehicle on its centre stand;
- Remove the swinging arm/engine fitting shown in
the picture
- Move the engine back
- Remove the spring anchoring the swinging arm
to the chassis as shown in the picture
Suspensions
SUSP - 223