Refitting The Front Wheel - APRILIA SR MAX 125 ie Service Station Manual

Suspensions
- Turn over the wheel and insert the internal spacer
with the part fitted with the Seeger ring facing the
bearing on the brake disc side.
- Heat the bearing seat on the side the brake disc
with the heat gun.
2 - Insert the two bearings one at a time using the punch consisting of adaptor handle, 32x35 mm
adaptor and 15 mm guide, and take it to the stop.
Specific tooling
020376Y Adapter handle
020357Y 32x35-mm Adaptor
020412Y 15-mm guide

Refitting the front wheel

- When refitting, pay attention in repositioning the
odometer drive correctly.
Locking torques (N*m)
Wheel axle nut
45 to 50
screws
6 - 7 Nm
Handlebar
SUSP - 204
Wheel axle clamp
SR MAX 125 ie