Front Brake Calliper Removal; Front Brake Calliper Overhaul - APRILIA SR MAX 125 ie Service Station Manual

Braking system
- Hold the pads in the correct position and insert the calliper in the brake disc.
- Fix the support calliper by means of the two screws at the specified torque
- Secure the pipe fitting to the calliper at the specified torque.
- Bleed the air from the system.
Front brake calliper
Removal
- Remove the two front brake calliper devices fas-
tening them to the support as shown in the photo-
graph.
NOTE
WHEN A PROCEDURE IS PLANNED INCLUDING THE
SERVICE OR REPLACEMENT OF THE CALLIPER, FIRST
LOOSEN THE FITTING CONNECTING THE PIPE TO THE
BRAKE CALLIPER
Overhaul
- Remove the brake calliper.
- Suitably support the brake calliper in a vice
- Remove the two pad fixing screws.
- Remove the pads being careful with the stop
spring.
- Remove the fixed plate by undoing the screw
shown in the photograph.
BRAK SYS - 234
SR MAX 125 ie