APRILIA SR MAX 125 ie Service Station Manual page 216

Suspensions
- Fit the spacer between the two ring nuts on the
steering tube in the position indicated.
- Insert the upper tightening ring nut, screw until it
stops and, with the specific tool, tighten to the in-
dicated torque.
Specific tooling
020055Y Wrench for steering tube ring nut
Locking torques (N*m)
Steering tube upper ring nut
Insert the collar shown in the figure and restore the
cable passage as shown in the figure.
- Fit the front wheel.
Steering bearing
SUSP - 216
40 ÷ 45
SR MAX 125 ie