Rear Brake Disc Removal; Rear Brake Disc Refitting; Rear Brake Disc Inspection - APRILIA SR MAX 125 ie Service Station Manual

Braking system
- Hold the pads in the correct position and insert the calliper in the brake disc.
- Fix the support calliper by means of the two screws at the specified torque
- Secure the pipe fitting to the calliper at the specified torque.
- Bleed the air from the system.
Rear brake disc
Removal
- Remove the rear wheel.
- Remove the brake calliper.
- Remove the disc from the wheel axle.
- Undo the five screws and remove the disc from
the wheel hub.
Refitting
Follow the removal operations but in reverse order.
NOTE
THE ARROW STAMPED ON THE DISC INDICATING THE RUNNING DIRECTION MUST BE FITTED
TOWARDS THE OUTSIDE OF THE VEHICLE.
Recommended products
Loctite 243 Medium strength threadlock
Medium Loctite 243 threadlock
Locking torques (N*m)
Brake disc fixing screw 5 to 6.5
Disc Inspection
- Remove the rear brake calliper.
BRAK SYS - 236
SR MAX 125 ie