Engine
- Remove the crankcase halves gasket and be
careful with the two alignment dowels.
- Unscrew the oil filter fitting if required.
- Once the crankcase halves have been separa-
ted, reach and remove the internal bulkhead and
the protection bulkhead for the mesh pre-filter.
Inspecting the crankshaft components
crankshaft components
NOTE
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Inspecting the crankshaft alignment
crankshaft alignment
NOTE
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
ENG - 144
SR MAX 125 ie