Removing The Cylinder - Piston Assy. - APRILIA SR MAX 125 ie Service Station Manual

Engine
- Slide off the valve and remove the lower support.
Specific tooling
020382Y Tool to extract valve cotters
- Remove the calibrated washer and replace, if re-
quired, as indicated above for checking residual
stroke as described in the page on «Engine/Ther-
mal group and timing system/valve check».
See also

Removing the cylinder - piston assy.

- Remove the chain guide slider; be careful with
the two alignment dowels and remove the cylinder.
- Remove the base gasket; be careful with the two
centring dowels and the dowel pin.
ENG - 130
SR MAX 125 ie