Mounting An Ex2300 Switch; Table 54: Ex2300 Switch Mounting Methods - Juniper EX2300-C Hardware Manual

EX2300-C and EX2300 Switches Hardware Guide
Related
Documentation

Mounting an EX2300 Switch

Table 54: EX2300 Switch Mounting Methods

Mounting Method
Desk or other level surface
(using the rubber feet
preinstalled on the chassis)
Desk or other level surface
(using screws)
Wall
A surface made of ferrous
material
Two-post rack or cabinet
128
"Mounting an EX2300 Switch on Four Posts of a Rack or Cabinet" on page 137
the separately orderable four-post rack-mount kit)
"Mounting an EX2300 Switch in a Recessed Position in a Rack or Cabinet" on page 153
(using the 2-in.-recess front-mounting brackets from the separately orderable
four-post rack-mount kit)
Follow instructions in "Connecting Earth Ground to an EX Series Switch" on page
3.
Follow instructions in "Connecting AC Power to an EX2300 Switch" on page
4.
Perform initial configuration of the switch by following instructions in
5.
and Configuring an EX Series Switch (CLI Procedure)" on page 179
Configuring an EX Series Switch (J-Web Procedure)" on page
Set the switch's management options by following the appropriate instructions:
Connecting a Device to a Network for Out-of-Band Management on page 167
Connecting a Device to a Management Console by Using an RJ-45 Connector on
page 168
Rack Requirements on page 59
Cabinet Requirements on page 60
Clearance Requirements for Airflow and Hardware Maintenance for EX2300 Switches
on page 61
Table 54 on page 128 lists the methods you can use to mount an EX2300 switch.
Switch Model
EX2300-C
EX2300
EX2300-C
EX2300-C
EX2300
EX2300-C
EX2300-C
EX2300
More Information
On a desk or other level surface by using the rubber feet preinstalled
on the chassis
On or under a desk or other level surface by using screws
On a wall by using screws
On a wall by using the separately orderable wall-mount kit
On or under a surface made of ferrous material by using the
separately orderable magnet-mount kit
On two posts in a 19-in. rack or cabinet by using the mounting
brackets (separately orderable for EX2300-C switches and provided
for EX2300 switches)
161.
"Connecting
or "Connecting and
182.
Copyright © 2017, Juniper Networks, Inc.
(using
155.