Table 58: Alarm Conditions On Ex2300 Switches - Juniper EX2300-C Hardware Manual

Copyright © 2017, Juniper Networks, Inc.

Table 58: Alarm Conditions on EX2300 Switches

Chassis
Component Alarm Condition
Temperature The temperature
inside the chassis
reaches the yellow
alarm limit.
The temperature
inside the chassis
reaches the red
alarm limit.
The temperature
sensor has failed.
Management Management
Ethernet link is
Ethernet
down.
interface
Chapter 19: Alarms and System Log Messages
Alarm
Severity Remedy
Minor Check the fan.
(yellow)
Open a support case using the Case
Manager link at
http://www.juniper.net/support/
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major Check the fan.
(red)
Open a support case using the Case
Manager link at
http://www.juniper.net/support/
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major Open a support case using the Case Manager
(red) http://www.juniper.net/support/
link at
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major Check whether a cable is connected to
(red) the management Ethernet interface, or
whether the cable is defective. Replace
the cable if required.
If you are unable to resolve the problem,
open a support case using the Case
Manager link at
http://www.juniper.net/support/
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
or
or
or
213