Special Instructions To Follow Before Connecting Earth Ground To A - Juniper EX2300-C Hardware Manual

Table 55: Parts and Tools Required for Connecting an EX Series Switch to Earth
Ground (continued)
Earthing
Terminal
Switch Location
EX4200 Left side of
the chassis
EX4300 Left side of
the chassis
EX4500 Left side of
the chassis
EX4550 Left side of
the chassis
EX6210 Rear panel
of the
chassis (on
lower left
side)
EX8208 Left side of
the chassis
Copyright © 2017, Juniper Networks, Inc.
Grounding Cable Grounding Lug
Requirements Specifications
14 WG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
The grounding Panduit
cable must be the LCD2-14A-Q or
same gage as the equivalent
power feed cables —provided
and as permitted
by the local code.
6 AWG (13.3 Panduit
mm²), minimum LCD2-14A-Q or
60°C wire, or as equivalent
permitted by the —provided
local code
Chapter 13: Connecting the Switch to Power
Screws and
Washers Screwdriver
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer
—provided
Two #¼" flat
washers—
provided
Two ¼-20 x 0.5 in. Phillips (+)
screws with #¼" number 2
split-washer
—provided
Two #¼" flat
washers—
provided
Additional
Information
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 158.
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 158.
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 158.
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 158.
157