EX2300-C and EX2300 Switches Hardware Guide
Table 51: Connector Pinout Information for the 10-Gigabit Ethernet Uplink Port (continued)
Pin
Signal
20
VeeT
Related
Documentation
RJ-45 to DB-9 Serial Port Adapter Pinout Information
Related
Documentation
118
Description
Module transmitter ground
See
EX2300 Switches Hardware Overview on page 3
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect
to a management device such as a PC or a laptop. If your laptop or PC does not have a
DB-9 male connector pin and you want to connect your laptop or PC to the device, use
a combination of the RJ-45 to DB-9 female adapter along with a USB to DB-9 male
adapter.
Table 52 on page 118
provides the pinout information for the RJ-45 to DB-9 serial port
adapter.
Table 52: RJ-45 to DB-9 Serial Port Adapter Pinout Information
RJ-45 Pin
Signal
1
RTS
2
DTR
3
TXD
4
GND
6
RXD
7
DSR
8
CTS
Connecting a Device to a Management Console by Using an RJ-45 Connector on page 168
for port location
DB-9 Pin
Signal
8
CTS
6
DSR
2
RXD
5
GND
3
TXD
4
DTR
7
RTS
Copyright © 2017, Juniper Networks, Inc.