Figure 6: Rear Panel Of An Ex2300-C Switch With 12 Gigabit Ethernet Ports Without Poe Capability - Juniper EX2300-C Hardware Manual

Copyright © 2017, Juniper Networks, Inc.
Figure 6: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet
Ports without PoE Capability
1— CLEI code label
2— Serial number ID label
The rear panel of the EX2300 switch except the EX2300-C switch consists of the following
components:
One management Ethernet port that supports an RJ-45 connector
One console port that supports an RJ-45 connector
One protective earthing terminal
One ESD point
Air exhaust openings
Serial number ID label
CLEI code label
One AC power cord inlet or DC power terminals
One USB port
Figure 7 on page 10 shows the rear panel of an AC-powered EX2300 switch with 24
Gigabit Ethernet ports with PoE capability and
of an EX2300 switch with 48 Gigabit Ethernet ports with PoE capability.
Figure 8 on page 10 shows the rear panel of an AC-powered EX2300 switch with 24
Gigabit Ethernet ports without PoE capability and
panel of an EX2300 switch with 48 Gigabit Ethernet ports without PoE capability.
Figure 9 on page 10 shows the rear panel of a DC-powered EX2300 switch with 24 Gigabit
Ethernet ports.
NOTE: DC-powered EX2300 switches do not provide PoE.
The AC power cord retainer clips extend out of the chassis by 3 in (7.62 cm).
Chapter 1: System Overview
3— Protective earthing terminal
4— AC power cord inlet
Figure 10 on page 11 shows the rear panel
Figure 11 on page 11 shows the rear
9