Figure 47: Measurements For Installing Mounting Screws To Mount An Ex2300 - Juniper EX2300-C Hardware Manual

EX2300-C and EX2300 Switches Hardware Guide
148
Figure 47: Measurements for Installing Mounting Screws to Mount an
EX2300 Switch on a Wall
Place the switch against the wall such that the front panel of the switch faces to the
4.
right side and the holes in the mounting brackets heads align with the mounting screw
heads.
Slide the switch chassis to the left or right a bit so that the mounting screws are pushed
5.
into the channels of the holes in the mounting brackets until the switch rests firmly
in place as shown in Figure 48 on page
Tighten the mounting screws.
6.
149.
Copyright © 2017, Juniper Networks, Inc.