Table 55: Parts And Tools Required For Connecting An Ex Series Switch To Earth Ground - Juniper EX2300-C Hardware Manual

EX2300-C and EX2300 Switches Hardware Guide

Table 55: Parts and Tools Required for Connecting an EX Series Switch to Earth Ground

Earthing
Terminal
Switch Location
EX2200 Rear panel
of the
chassis
EX2300-C Rear panel
of the
chassis
EX2300 Rear panel
of the
chassis
EX3200 Rear panel
of the
chassis
EX3300 Rear panel
of the
chassis
EX3400 Rear panel
of the
chassis
156
for connecting a switch to earth ground. Before you begin connecting a switch to earth
ground, ensure you have the parts and tools required for your switch.
Grounding Cable Grounding Lug
Requirements Specifications
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
14 AWG (2 mm²), Panduit
minimum 90°C LCC10-14BWL or
wire, or as equivalent—
permitted by the not provided
local code
Screws and
Washers Screwdriver
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—not
provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—not
provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—not
provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—
not provided
Two 10-32 x .25 in. Phillips (+)
screws with #10 number 2
split-lock washer—
not provided
Two #10 flat
washers—not
provided
Copyright © 2017, Juniper Networks, Inc.
Additional
Information
See "Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch"
on page 158.