Mounting An Ex2300 Switch On A Wall; Mounting An Ex2300-C Switch On A Wall - Juniper EX2300-C Hardware Manual

Mounting an EX2300 Switch on a Wall

Mounting an EX2300-C Switch on a Wall

Copyright © 2017, Juniper Networks, Inc.
Connecting AC Power to an EX2300 Switch on page 161
Connecting DC Power to an EX2300 Switch on page 163
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 179
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 182
Mounting an EX2300 Switch in a Recessed Position in a Rack or Cabinet on page 153
Rack-Mounting and Cabinet-Mounting Warnings on page 234
This topic describes the process of mounting an EX2300 switch on a wall.
Mounting an EX2300-C Switch on a Wall on page 141
1.
Mounting an EX2300 Switch Except the EX2300-C Switch on a Wall on page 144
2.
You can mount an EX2300-C switch—the compact, fanless model—on a wall by using
the mounting slots on the bottom of the chassis and mounting screws to secure the
switch.
Before mounting the switch on a wall:
Verify that the site meets the requirements described in
for EX2300 Switches" on page
Read "General Safety Guidelines and Warnings" on page
to "Chassis Lifting Guidelines" on page
Ensure that you have the following parts and tools available:
3 wall-mounting screws (M4 x 30 mm or 8-32 x 1.25 in. Phillips pan-head machine
screws—not provided)
Phillips (+) screwdriver, number 2
Hollow wall anchors rated to support up to 75 lb (34 kg) if you are not inserting the
mounting screws directly into wall studs.
(Optional and separately orderable) 1 cable guard kit. The kit includes the cable guard
and 3 number-8 Phillips truss-head screws to secure the cable guard to the EX2300-C
switch.
(Optional and separately orderable) 1 standard cable lock kit to secure the switch from
theft by connecting the cable to the security slot on the switch and a desk or a rack to
fasten the cable lock. The kit includes the standard cable lock and its key.
"Site Preparation Checklist
51.
223, with particular attention
232.
Chapter 12: Installing the Switch
141