Table of Contents
Advertisement
Related
Documentation
Mounting an EX2300-C Switch on or Under a Surface Made of Ferrous Material
Copyright © 2017, Juniper Networks, Inc.
Figure 48: Mounting an EX2300 Switch on a Wall
Connecting AC Power to an EX2300 Switch on page 161
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 179
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 182
You can mount an EX2300-C switch on or under a surface made of ferrous material by
using the separately orderable magnet-mount kit.
WARNING:
Do not mount EX2300-C switches on a ceiling by using the
separately orderable magnet-mount kit.
NOTE:
Do not block the vents on the top of EX2300-C switches. Blocking
the vents can lead to overheating of the switch chassis.
Before mounting the switch on or under a surface made of ferrous material:
Verify that the site meets the requirements described in
for EX2300 Switches" on page
"Site Preparation Checklist
51.
Chapter 12: Installing the Switch
149
Hide quick links:
Advertisement
Table of Contents
