Ex2300 Switch Models; Figure 10: Rear Panel Of An Ac-Powered Ex2300 Switch With 48 Gigabit Ethernet Ports With Poe Capability; Figure 11: Rear Panel Of An Ac-Powered Ex2300 Switch With 48 Gigabit Ethernet Ports Without Poe Capability - Juniper EX2300-C Hardware Manual

Related
Documentation

EX2300 Switch Models

Copyright © 2017, Juniper Networks, Inc.
Figure 10: Rear Panel of an AC-Powered EX2300 Switch with 48 Gigabit
Ethernet Ports with PoE Capability
1— USB port
2— Management Ethernet port
3— RJ-45 console port
4— Protective earthing terminal
5—ESD point
Figure 11: Rear Panel of an AC-Powered EX2300 Switch with 48 Gigabit
Ethernet Ports without PoE Capability
1— USB port
2— Management Ethernet port
3— RJ-45 console port
4— Protective earthing terminal
5—ESD point
EX2300 Switch Models on page 11
Site Preparation Checklist for EX2300 Switches on page 51
The EX2300 switch is available with 12 or 24, or 48 built-in RJ-45 network ports with full
Power over Ethernet (PoE) or Power over Ethernet plus (PoE+) capability on all built-in
RJ-45 network ports (access ports), or no PoE capability.
EX2300 switch models.
EX2300-C switches have two uplink ports and EX2300 switches except EX2300-C
switches have four uplink ports. Uplink ports do not support PoE.
Chapter 1: System Overview
6— Air exhaust openings
7— Serial number ID label
8— CLEI code label
9— AC power cord inlet
6— Air exhaust opening
7— Serial number ID label
8— CLEI code label
9— AC power cord inlet
Table 3 on page 12 lists the
11