Rear Panel Of An Ex2300 Switch; Figure 4: Front Panel Of An Ex2300 Switch With 48 Gigabit Ethernet Ports With; Figure 5: Rear Panel Of An Ex2300-C Switch With 12 Gigabit Ethernet Ports With - Juniper EX2300-C Hardware Manual

EX2300-C and EX2300 Switches Hardware Guide

Rear Panel of an EX2300 Switch

8
Figure 4: Front Panel of an EX2300 Switch with 48 Gigabit Ethernet Ports
with PoE Capability
1— RJ-45 network ports
2— Chassis status LEDs
3— Port status mode LEDs. The LED labeled
PoE
is present only on models with PoE
capability.
The rear panel of an EX2300-C switch consists of the following components:
Serial number ID label
CLEI code label
One protective earthing terminal
Heatsink
One AC power cord inlet
Figure 5 on page 8 shows the rear panel of an EX2300-C switch with 12 Gigabit Ethernet
ports with PoE capability and
switch with 12 Gigabit Ethernet ports without PoE capability.
EX2300-C switches being fanless models have no exhaust openings. EX2300 switches
have vents on the top of the chassis. The PoE models have a heatsink installed in the
rear panel to dissipate heat, while non-PoE models have no heatsink.
Figure 5: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports
with PoE Capability
1— CLEI code label
2— Serial number ID label
3—Protective earthing terminal
1
4— Factory Reset/Mode button
5— Mini-USB console port
6— 10-Gigabit Ethernet uplink ports
Figure 6 on page 9 shows the rear panel of an EX2300-C
4— Heatsink—only in PoE models
5— AC power cord inlet
Copyright © 2017, Juniper Networks, Inc.
3
2
6 5 4