EX2300-C and EX2300 Switches Hardware Guide
Related
Documentation
Management Port LEDs in EX2300 Switches
Table 7: Link/Activity LED on the Management Port on EX2300 Switches
LED
Color
Link/Activity
Green
18
You can view the colors of the two LEDs remotely through the CLI by issuing the
operational mode command show chassis led.
EX2300 Switches Hardware Overview on page 3
Chassis Component Alarm Conditions on EX2300 Switches on page 212
Checking Active Alarms with the J-Web Interface on page 214
Understanding Alarm Types and Severity Levels on EX Series Switches on page 211
The management port on an EX2300 switch has two LEDs that indicate link/activity and
port status. The EX2300 switches except the EX2300-C switch have the management
port on the rear panel; the EX2300-C switches have the management port on the front
panel. See
Figure 14 on page 18
Figure 14: LEDs on the Management Port on EX2300-C Switches
1—
Link/Activity LED
Figure 15: LEDs on the Management Port on EX2300 Switches
1—
Link/Activity LED
Table 7 on page 18
describes the Link/Activity LED.
State and Description
Blinking—The port and the link are active, and there is link activity.
Off—The port is not active.
Table 8 on page 19
describes the Status LED.
and
Figure 15 on page
18.
2—
Status LED
2—
Status LED
Copyright © 2017, Juniper Networks, Inc.