Cleaning The Document Glass; Replacing The Snap-In Pad Module; Removing The Snap-In Pad Module - Oki C9850 Series Troubleshooting And Maintenance Manual

C
LEANING THE DOCUMENT GLASS
The document glass needs to be cleaned occasionally to ensure optimum image quality and
performance. Clean the glass as follows.
1. Open the document cover (1).
2. Moisten a soft, clean cloth with isopropyl alcohol (95%).
3. Gently wipe the document glass (2) and the white sheet (3) on the lower side of the
document cover to remove dust or any toner particles.
4. Close the document cover (1).
Your machine is now ready for use.
R
EPLACING THE SNAP
After scanning approximately 100,000 pages through the ADF, the pad may become worn
and you may experience problems with document feeding. In this case, you are
recommended to replace the pad module.
Replace the pad module as follows.
R -
EMOVING THE SNAP IN PAD MODULE
1. Press down the ADF release button (1) and open the ADF front cover (2).
2
3
2
-
IN PAD MODULE
1
Maintenance – scanner unit > 45
1