Removing The Roll Paper - Oki Teriostar LP-1030 User Manual

Replacing the Roll Paper
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
‹ Removing the Roll Paper
1
Chapter
5
2
46
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Note
Use the OKI Data Infotech-specified roll paper. If your paper is not OKI Data
‹
Infotech-specified, the image quality is not guaranteed.
Store paper in a cool, dark, and dry place
‹
‘ The drawer for roll 2 is also open when you open the drawer for roll 1.
TIP
When opening the drawer for roll 1
Paper flange
the drawer for roll 2
is also opened.
Pull out the drawer for roll 1, or the
drawer for roll 2.
Hold the center handle with your fingers, and pull
it out towards yourself slowly.
(In the example in the figure, the drawer for roll 1
is opened.)
Note
You are recommended to open the roll
‹
paper drawers with both hands if you
cannot open them easily.
Rewind and remove the roll paper.
Turn the paper flanges in the direction shown in
the figure. Rewind the roll paper until the end of
the paper appears.
Lift up the paper flanges, and remove the roll
paper.
When opening the drawer for roll 2
the drawer for roll 1
is not opened.