Description - Avaya 1110 Fundamentals

Avaya 1150E IP Deskphone
• Changing the TN of an existing Avaya 1150E IP Deskphone
• Replacing an Avaya 1150E IP Deskphone
• Removing an Avaya 1150E IP Deskphone from service
If power to the phone is interrupted after you install and configure an IP phone, you are not
required to reenter the IP Parameters, Node Numbers, or Terminal Number (TN). There is also
no need to again acquire the firmware.

Description

The Avaya 1150E IP Deskphone uses the customer IP data network to communicate with the
Avaya Communication Server 1000 (Avaya CS 1000). The Avaya 1150E IP Deskphone
translates voice into data packets for transport using Internet Protocol. Use a Dynamic Host
Configuration Protocol (DHCP) server to provide information that you can use for the Avaya
1150E IP Deskphone network and Avaya CS 1000 connections.
The Avaya 1150E IP Deskphone is configured for either an Agent, or a Supervisor. The Avaya
1150E IP Deskphone is shipped with Agent key configuration but can be modified to support
Supervisor key configuration by replacing the key caps. Remove the key caps using the Key
Cap removal tool (product number NTNM19AA). For information about Avaya 1150E IP
Deskphone components, see
Figure 49: Avaya 1150E IP Deskphone default Agent key configuration
the Avaya 1150E IP Deskphone default Agent key configuration.
262 IP Deskphones Fundamentals
on page 283.
Package components
Comments? infodev@avaya.com
on page 282.
on page 283.
on page 274.
on page 263 shows
February 2013