Avaya 1110 Fundamentals page 628

DHCP server configuration
Configuring Solaris 2 to work with IP Phones
1. Do one of the following:
2. Create a Client Identifier macro by doing one of the following:
3. Invoke the DHCP services on the Solaris server by entering at the prompt.:
Table 137: DHCP tab table
Table 137: DHCP tab table
Locale
nbvws286
:Include=Locale:LeaseTim=150:LeaseNeg:DNSdmain=ca.avaya.com:/
47.147.75.0
47.147.64.0
:Broadcst=47.147.79.255:Subnet=255.255.240.0:MTU=1500:/
Router=47.147.64.1:NISdmain=bvwlab:NISservs=47.147.64.91:
#
NI2004
Nortel-i2004-A m:
628 IP Deskphones Fundamentals
• Create a symbol definition for defining a Site Specific option by typing the
following in the dhcptab configuration table located at /etc/default/dhcp:
NI2004 s Site,128,ASCII,1,0
• Use the dhtadm configuration table management utility by typing the following
command at the prompt:
dhtadm -A -s NI2004 –d 'Site,128,ASCII,1,0'
Where:
NI2004:symbol name s:identify definition as symbol Site:site specific option
128:option code ASCII:data type 1:granularity 0:no maximum size of
granularity, that is, infinite
• entering the following:
Nortel-i2004-A m:NI2004="NortelÉ":
• Use the dhtadm command:
dhtadm -A -m Nortel-i2004-A -d ':NI2004="NortelÉ":'
in.dhcpd,
Specify –d and/or –v options for debug mode.
on page 628 shows examples of the information.
m :UTCoffst=18000:
m
DNSserv=47.108.128.216 47.211.192.8 47.80.12.69:
m :NISdmain=bvwlab:NISservs=47.147.64.91:
m
s Site,128,ASCII,1,0
Comments? infodev@avaya.com
February 2013