Before You Begin; First-Time Installation; Configuring The Avaya 1140E Ip Deskphone - Avaya 1110 Fundamentals

Avaya 1140E IP Deskphone

Before you begin

Before installing the Avaya 1140E IP Deskphone, complete the following pre-installation
checklist
• Ensure one Avaya 1140E IP Deskphone boxed package exists for each Avaya 1140E IP
Deskphone you install. For a list of Avaya 1140E IP Deskphone package components,
see Package components
• Ensure one Software License exists for each Avaya 1140E IP Deskphone you install.
• Ensure the host Call Server is equipped with a Voice Gateway Media Card and a Signaling
Server with the Line TPS application.
• If a global power supply is required, ensure the approved Avaya global power supply
(model number NTYS17xxE6) is used. See
• Ensure the latest IP Phone firmware is deployed to the IP telephony node. For more
information, see Avaya Signaling Server IP Line Applications Fundamentals,
NN43001-125.

First-time installation

You must first install an IP telephony node with the Communication Server. For information
about installing an IP telephony node, see Avaya Signaling Server IP Line Applications
Fundamentals, NN43001-125.
Caution:
Damage to Equipment
Do not plug your Avaya 1140E IP Deskphone into an ISDN connection. Severe damage can
result.

Configuring the Avaya 1140E IP Deskphone

Use Configuring the Avaya 1140E IP Deskphone
IP Deskphone.
Configuring the Avaya 1140E IP Deskphone
1. Configure a virtual loop on the Call Server using LD 97.
252 IP Deskphones Fundamentals
on page 251.
Package components
on page 252 to configure the Avaya 1140E
Comments? infodev@avaya.com
on page 251.
February 2013