Tftp Firmware Upgrade; Redeploying An Avaya 1120E Ip Deskphone - Avaya 1110 Fundamentals

Avaya 1120E IP Deskphone

TFTP firmware upgrade

When you enter Cfg TFTP = 1 (for yes), and enter an IP address, the IP Phone searches for
an upgrade file on the TFTP Server.
Users of CS 1000 Release 4.5, or later do not need to enter a TFTP IP address.
For further information about TFTP firmware upgrade, see

Redeploying an Avaya 1120E IP Deskphone

You can redeploy an existing previously configured Avaya 1120E IP Deskphone on the same
Call Server. For example, the Avaya 1120E IP Deskphone can be assigned to a new user (new
TN) or to an existing user who moved to a new subnet by changing the TN of the Avaya 1120E
IP Deskphone. For further information, see Avaya Converging the Data Network with VoIP
Fundamentals, NN43001-260.
Changing the TN of an existing Avaya 1120E IP Deskphone
1. Repower the Avaya 1120E IP Deskphone.
2. If the node password is enabled and NULL, choose one of the following
3. Press OK when the node number displays.
4. Enter the password at the password screen and press OK.
238 IP Deskphones Fundamentals
During the reboot sequence of a previously configured IP Phone, the Avaya 1120E
IP Deskphone displays the existing node number for approximately 5 seconds.
a. Disable the password.
b. Set the password as non-NULL.
If
the node password is enabled and is
not NULL
the node password is disabled
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Element Manager.
For further information, see Element Manager System Reference - Administration,
NN43001-632.
Comments? infodev@avaya.com
TFTP Server
Then
a password screen displays. Go to
page 238.
a TN screen displays. Go to
page 239.
on page 631.
4 on
5 on
February 2013