Avaya 1110 Fundamentals page 484

Provisioning the IP Phones
<value>
<ConnectServer>
<NodeID>
<TN>
The following example of a SYSTEM.PRV file illustrates various valid string formats. The "reg"
item data can also appear in any of the supported .PRV files.
s1ip=47.11.84.184;
REG=00:1B:BA:F8:82:0D CS1K S1 123 096-1-22-00;
REG=00:1B:BA:F8:82:0E CS1K S1 44 096-1-22-01 PDN 8990;
REG=00:1B:BA:F8:82:1E CS1K,S1,7777,096-1-22-04,PDN,1234;
REG=00:1B:BA:F8:82:1F CS1K, PDN,9135559876;
Automatic provisioning using UNIStim
You can use UNIStim to automatically provision a limited number of parameters, such as Layer
2 priority bits (Ctrl and Media priority bits) and Differentiated Service Code Point (DiffServ). For
information about configuring these parameters, see Avaya Signaling Server IP Line
Applications Fundamentals, NN43001-125.
With UNIStim 3.1 and later, you can use Info Block to automatically provision the following
parameters on supported IP Deskphones:
• nis - network port speed
• nid - network port duplex mode
• dhcp - Dynamic Host Configuration Protocol (DHCP)
• ca - Certificate Authority (CA) server
• cahost - CA host name
• cadomain - CA domain name
484 IP Deskphones Fundamentals
The parameter value
For PDN, it is the Prime DN digit string sent to the
application server in the subscribe message.
Typically it is set to the same number provisioned for
the IP Phone's prime DN; however, it can be set to
any digit string as long as the application server is
provisioned with the same number for this phone.
Maximum size is 16 digits.
S1 and S1S2 values of the Connect Server.
0 to 9999 value for the Node ID of the TPS.
Terminal Number of phone on system.
Large system TN: LLL-SS-CC-UU or LLL SS CC UU
Numbers in the TN can be separated by spaces,
dashes, or any combination of spaces and dashes.
Fields can have leading zeros to fill the field size.
Comments? infodev@avaya.com
February 2013