Avaya 1110 Fundamentals page 188

Avaya 2050 IP Softphone
Removing Avaya 2050 IP Softphone (Version 1)
1. Select Start > Settings > Control Panel > Add/Remove Programs.
2. Choose Avaya i2050 Software Phone.
3. Select Remove.
4. Select Yes to confirm.
Removing Avaya 2050 IP Softphone (Version 2 or Release 3)
1. Select Start > Settings > Control Panel > Add/Remove Programs.
2. Choose Avaya 2050 IP Softphone.
3. Select Remove.
4. Select Yes to confirm.
Use the following procedure to install the Accessibility Interface for visually impaired users from
the Avaya 2050 IP Softphone CD-ROM.
Installing the Accessibility Interface
1. Press and hold Shift.
2. Insert the Avaya 2050 IP Softphone installation CD into your CD-ROM drive.
3. Press and hold Shift for several seconds to prevent Autorun from starting.
4. If the Installation Wizard starts
5. From Windows Explorer, select your CD-ROM.
6. Select Accessibility.bat.
188 IP Deskphones Fundamentals
a. Wait until the Welcome to the Install Shield Wizard for the Avaya 2050
IP Softphone screen appears.
b. Press Tab to select Cancel.
c. Press Return.
d. Click Yes to confirm that you want to cancel the installation.
e. Click Finish.
The file Accessibility.bat executes the command line "setup /s /vqb/vUI508=1". This
installs the application and sets the user interface to the Accessibility Interface.
Comments? infodev@avaya.com
February 2013