Replacing An Avaya 1140E Ip Deskphone; Removing An Avaya 1140E Ip Deskphone From Service - Avaya 1110 Fundamentals

3. Press OK when the node number displays.
4. Enter the password at the password screen, and press OK.
5. Select the Clear soft key to clear the existing TN.
6. Enter the new TN.

Replacing an Avaya 1140E IP Deskphone

Important:
Two IP Phones cannot share the same TN. You must remove the Avaya 1140E IP
Deskphone that currently uses the TN.
Replacing an Avaya 1140E IP Deskphone
1. Obtain the node and TN information of the phone you want to replace.
2. Disconnect the Avaya 1140E IP Deskphone that you want to replace.
3. Follow
4. Enter the same TN and Node Number as the Avaya 1140E IP Deskphone you

Removing an Avaya 1140E IP Deskphone from service

Removing an Avaya 1140E IP Deskphone from service
1. Disconnect the Avaya 1140E IP Deskphone from the network or turn the power
IP Deskphones Fundamentals
If
the node password is enabled and is
not NULL
the node password is disabled
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Element Manager.
For further information, see Element Manager System Reference - Administration,
NN43001-632.
Configuring the Avaya 1140E IP Deskphone
1140E IP Deskphone. To configure the IP Phone, see
2007 IP Deskphone and Avaya 1100 Series IP Deskphones
replaced. The Call Server associates the new Avaya 1140E IP Deskphone with the
existing TN.
off.
Replacing an Avaya 1140E IP Deskphone
Then
a password screen displays. Go to
page 259.
a TN screen displays. Go to
page 259.
on page 252 to install the Avaya
Manual provisioning of Avaya
4 on
5 on
on page 503.
February 2013 259