First-Time Installation; Configuring The Avaya 1120E Ip Deskphone; Connecting The Components - Avaya 1110 Fundamentals

Avaya 1120E IP Deskphone

First-time installation

You must first install an IP telephony node with the Communication Server. For information
about installing an IP telephony node, see Avaya Signaling Server IP Line Applications
Fundamentals, NN43001-125.
Caution:
Damage to Equipment
Do not plug your Avaya 1120E IP Deskphone into an ISDN connection. Severe damage can
result. The Avaya 1120E IP Deskphone does not support multiple devices connected
through the PC Ethernet port.

Configuring the Avaya 1120E IP Deskphone

Use Configuring the Avaya 1120E IP Deskphone
IP Deskphone for the first time.
Configuring the Avaya 1120E IP Deskphone
1. Configure a virtual loop on the Call Server using LD 97.
2. Configure the Avaya 1120E IP Deskphone on the Call Server using LD 11. At the
3. Configure the Avaya 1120E IP Deskphone in Business Element Manager. IP

Connecting the components

Use Connecting the components
232 IP Deskphones Fundamentals
For more information about configuring a virtual loop, see Avaya Signaling Server
IP Line Applications Fundamentals, NN43001-125 and Avaya Software Input
Output Reference-Administration, NN43001-611.
prompt, enter the following
REQ:new TYPE: 1120
For more information about configuring the Avaya 1120E IP Deskphone using LD
11, see Avaya Software Input Output Reference-Administration, NN43001-611.
Phones are configured using the Phones section in the Business Element Manager
navigation tree. For more information about configuring the Avaya 1120E IP
Deskphone using Business Element Manager, see Avaya Business Element
Manager System Reference - Administration , NN43001-632.
Comments? infodev@avaya.com
on page 232 to configure the Avaya 1120E
on page 233 to connect the components for the IP Phone.
February 2013