Replacing An Avaya 1120E Ip Deskphone; Removing An Avaya 1120E Ip Deskphone From Service - Avaya 1110 Fundamentals

5. Select the Clear soft key to clear the existing TN.
6. Enter the new TN.

Replacing an Avaya 1120E IP Deskphone

Important:
Two IP Phones cannot share the same TN. You must remove the Avaya 1120E IP
Deskphone that currently uses the TN.
Replacing an Avaya 1120E IP Deskphone
1. Obtain the node and TN information of the phone you want to replace.
2. Disconnect the Avaya 1120E IP Deskphone that you want to replace.
3. Follow
4. Enter the same TN and Node Number as the Avaya 1120E IP Deskphone you

Removing an Avaya 1120E IP Deskphone from service

Removing an Avaya 1120E IP Deskphone from service
1. Disconnect the Avaya 1120E IP Deskphone from the network or turn off the
2. In LD 11, enter the following: REQ: OUT TYPE: 1120 TN: LLL S CC UU
IP Deskphones Fundamentals
Configuring the Avaya 1120E IP Deskphone
1120E IP Deskphone. To configure the IP Phone, see
2007 IP Deskphone and Avaya 1100 Series IP Deskphones
replaced. The Call Server associates the new Avaya 1120E IP Deskphone with the
existing TN.
power.
The service to the PC is disconnected as well if the PC connects to the Avaya 1120E
IP Deskphone.
If the Avaya 1120E IP Deskphone was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
Replacing an Avaya 1120E IP Deskphone
on page 232 to install the Avaya
Manual provisioning of Avaya
on page 503.
February 2013 239