Replacing An Avaya 1210 Ip Deskphone - Avaya 1110 Fundamentals

Avaya 1210 IP Deskphone
3. Press OK when the node number displays.
4. Enter password at the password screen, and press OK.
5. Select the Clear soft key to clear the existing TN.
6. Enter the new TN.
7. Click OK to save and accept changes.

Replacing an Avaya 1210 IP Deskphone

Important:
Two IP Phones cannot share the same TN. You must remove the Avaya 1210 IP Deskphone
that currently uses the TN.
Replacing an Avaya 1210 IP Deskphone
1. Obtain the node and TN information of the phone you want to replace.
2. Disconnect the Avaya 1210 IP Deskphone that you want to replace.
3. Follow
4. Enter the same TN and node number as the Avaya 1210 IP Deskphone you
80 IP Deskphones Fundamentals
a. Disable the password.
b. Set the password as nonNULL.
If
you configure the node password to
NULL
the node password is disabled
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Element Manager.
For more information, see Avaya Element Manager System Reference -
Administration , NN43001-632.
Configuring the Avaya 1210 IP Deskphone
1210 IP Deskphone. To configure the IP Phone, see
1110 IP Deskphone and Avaya 1200 Series IP Deskphones
replaced. The system associates the new Avaya 1210 IP Deskphone with the
existing TN.
Comments? infodev@avaya.com
Then
a password screen displays. Go to
page 80.
a TN screen displays. Go to
page 80.
on page 76 to install the Avaya
Manual provisioning of Avaya
4 on
5 on
on page 493.
February 2013