Avaya 1110 Fundamentals page 596

IP Phone diagnostic utilities
7. Press the Ping soft key to have the IP Phone attempt to access the IP address, up
8. To stop the ping before completing, tap the Stop soft key.
9. Press the Tracert soft key to request the IP Phone to trace the route to the entered
10. To stop Tracert before it completes, tap the Stop soft key.
11. Press the Return soft key to return to Local Tools menu or the Stop key to exit the
596 IP Deskphones Fundamentals
to the number of times shown on the top of the screen.
The IP Phone displays the following
Pinging x.x.x.x with 64 bytes (where x.x.x.x is the entered IP address)
The Return soft key changes to Stop and the other soft keys become blank.
The IP Phone attempts to contact (ping) the address the number of configured
times, and displays the results of each attempt.
The Stop soft key becomes the Return soft key. The results of ping are displayed
as follows
• Packets transmitted ( Tx )
• Packets received ( Rx )
• Percentage of Packets Lost ( Lost )
• Minimum round trip time ( Min )
• Maximum round trip time ( Max )
• Average round trip time ( Avg )
IP address, up to MaxHop nodes.
The IP Phone displays the following
Tracing route to: (x.x.x.x) over a maximum of y hops (where
x.x.x.x is the entered IP address and y is the number of hops displayed at the top
of the screen)
The Return soft key changes to Stop and the other soft keys become blank.
The IP Phone traces the route to the address for the configured number of server
hops, displaying the hop number (starting at 0), the time in milliseconds, and the IP
address.
When the trace is complete, the screen displays the following
Trace complete.
The Stop soft key becomes the Return soft key when Tracert stops.
menu and return to the IP Phone display.
Comments? infodev@avaya.com
February 2013