Avaya 1110 Fundamentals page 564

IP Phone diagnostic utilities
If the IP Phone receives both the Nortel-i2004-A and Nortel-i2004-B option types, the phone
will display Nortel-i2004-A option type information, even though Nortel-i2004-B option type
information has higher priority.
UNIStim/RUDP statistics
In Remote Mode, the system administrator can view RUDP statistics (for example, number of
messages sent, received, retries, resets, and uptime) for the IP Phones.
RTP/RTCP statistics
In Remote Mode, the system administrator can view RTP/RTCP QoS metrics (for example,
packet loss and jitter) while a call is in progress.
Network QoS Process
In Remote Mode, the system administrator can view QoS statistics (for example, packets sent,
packets received, packet loss, jitter average and jitter maximum, and round trip delay).
Supplicant Status
The system administrator uses this option to determine whether 802.1x is enabled or disabled
802.1x.
Authentication State
The system administrator uses this option to determine whether the IP Phone is currently
authenticated with the 802.1x system. The following are valid state values
• LogOff
• Disconnected
• Connected
• Acquired
• Authorizing
• Held
• Authorized
• Dbl Authd
564 IP Deskphones Fundamentals
Comments? infodev@avaya.com
February 2013