Avaya 1110 Fundamentals page 123

Prompt
TYPE
TN
KEM
...
CLS
KEY
PAGEOFST
KEY <key>
KEMOFST
KEY <key>
IP Deskphones Fundamentals
Response
1220/1230 For Avaya 1220 IP Deskphone, Avaya 1230 IP
Deskphone
l s c u Where l = loop, s = shelf, c = card, u = unit.
Enter loop (virtual loop), shelf, card, and unit (terminal
number), where unit = 0 to 31.
(0) - 4/<CR> Number of attached KEM (0). Up to four LCD
Expansion Modules are supported.
... ...
KEM4 KEM4 CLS must be defined
0 - <see text>/ Key number range expanded to support number of
<CR> LCD Expansion Modules specified by KEM prompt.
The range on the IP Phone is as follows:
KEM value:
0 1 2 3 4
<Page> PAGEOFST is prompted if one or two LCD Expansion
<KeyOff-set> / Module are specified at the KEM prompt for the Avaya
<CR> 1230 IP Deskphone and <CR> is entered at the KEY
prompt. The PAGEOFST is not supported on the
Avaya 1220 IP Deskphone.
Page number (0 to 3) 0 - first page on KEM 1 1 -
second page on KEM 1 2 - first page on KEM 2 3 -
second page on KEM 2
Key offset number (0 to 11). After you enter the offset
number, the KEY prompt is prompted with the
appropriate KEY value filled in. <CR> ends the input.
<keys conf <key> is the key number for the Page + Key Offset
data>/ <CR> entered at PAGEOFST. Enter the key configuration
<CR> or just <CR>.
<KEM> <Key- KEMOFST is prompted if three or four LCD Expansion
Off-set> / <CR> Modules are specified at the KEM prompt and <CR>
is entered for KEY prompt.
<KEM> - KEM number (1 to 4) 1 - for KEM 1 (32 to 43)
2 - for KEM 2 (44 to 55) 3 - for KEM 3 (56 to 67) 4 - for
KEM 4 (68 to 79)
<Key Offset> - key offset number (0 to 11). After you
enter the offset number, the KEY prompt is prompted
with the appropriate KEY value filled in. <CR> ends
the input.
<keys conf <key> is the key number for the KEM + Key Offset
data>/ <CR entered at KEYOFST. Enter the key configuration
<CR> or just <CR>.
Description
KEY range:
0 to 31 32 to 43 44 to 55
56 to 67 68 to 79
February 2013
Configuration
123