Avaya 1110 Fundamentals page 575

• Auto Sense/Negotiate = Auto Negotiate Protocol Received or Not (Y – Yes, N – No)
In the IP Phone Configuration menu, Auto Negotiate mode is the default setting for initial
startup. If the telephone connects to a network that supports Auto Negotiate, it selects
the best speed and duplex mode available. For more information, the applicable IP Phone
section in this document.
• VLANPriority = IP Phone VLAN priority
• VLANID = IP Phone VLAN ID
• PCollision = network packet collision peg counts
• CRCErrors = network CRC errors peg counts
• FrameErrors = network Framing errors peg counts
IP Networking Statistics
Figure 90: IP Networking Statistics data display screen
displayed from the IP Networking Statistics submenu item.
Figure 90: IP Networking Statistics data display screen
In Figure 90: IP Networking Statistics data display screen
• PacketTx = IP Phone packets sent
• PacketRx = IP Phone packets received
• BcastPktRx = broadcast packets received
• McastPktRx = multicast packets received
• InPktDisc = incoming packets discarded
• OutPktDisc = outgoing packets discarded
• UnknownPkts = unknown protocol packets discarded
• ICMPType-Code = the last ICMP message: XXX-XXX
DHCP Statistics
Figure 91: DHCP information data display page
from the DHCP Statistics submenu item.
IP Deskphones Fundamentals
Text-based diagnostic utilities
on page 575 illustrates the data
on page 575,
on page 576 illustrates the data displayed
February 2013 575